%define ntoproot	/usr

Summary: ntop shows the network usage.
Name: ntop
Version: 2.2
Release: 1.8
Source: ntop-2.2.tgz
Source1: ntop.init
Source2: ntop.logrotate
Source3: ntop.conf.sample
Source4: 1STRUN.txt
Source5: FAQ
Source6: BUILD-NTOP.txt
Patch1: version.patch
#Patch2: makefile_am.patch
License: GPL
Group: Applications/System
BuildPrereq: glibc, glibc-devel, gcc, cpp, gawk, autoconf, automake, binutils, openssl, openssl-devel, gdbm, gdbm-devel, libpcap, rrdtool, zlib-devel, glib-devel
Requires: glibc, openssl, gdbm, libpcap, chkconfig, rrdtool

Buildroot: %{_tmppath}/%{name}-root
Prereq: /sbin/chkconfig, /sbin/ldconfig

%description
ntop is a network and traffic analyzer that provides a wealth of
information on various networking hosts and protocols. ntop is primarily
accessed via a built-in web interface. Optionally, data may be stored
into a database for analysis or extracted from the web server in formats
suitable for manipulation in perl or php.

See 1STRUN.txt for the 1st time startup procedure!  See FAQ for answers
to questions and BUILD-NTOP.txt for howto build from source.

ntop 2.2 is a STABLE release, from the ntop cvs tree at cvs.ntop.org. 

This version is compiled with rrdtool.  It assumes that the associated
rrdtool rpm has been installed and that rrdtool is installed in /usr.
Note that SOME rrdtool packages do not have the librrd.so, only a
librrd.a, which may cause problems between the older version of gd
included with rrdtool and the gd-1.8.3 that ntop uses.

This version is compiled WITH SSLv3.

This version is compiled WITHOUT --enable-xmldump (dump.xml handler)

This version is compiled WITH --enable-i18n.

IgnoreSIGPIPE and SSLWATCHDOG are not compiled but may be selected at run times.

Note that the command line version, intop, is unsupported. And is NOT
included in this rpm - if you want it you will have to build from
source!

This version is compiled on a Pentium III, under RedHat 7.3+ using User
Mode Linux.  (Note that updated autoconf 2.53 and automake 1.6.3 from
RedHat 8.0 are required) (Also note that in order to work with the
rrdtool rpms, glibc and it's associated programs have been updated to
RedHat 8 levels).

YOU MUST SETUP A PASSWORD BEFORE RUNNING NTOP - see 1STRUN.txt in
/usr/share/doc/ntop-<release>

Please send problem reports (using the automatically generated form if
at all possible) (Click on the 'bug' icon on the About tab) to the ntop
mailing list.

%prep
%setup -q -c ${NAME}${VERSION}

%build
unset RPM_OPT_FLAGS
%undefine optflags 
# Adjust the .tgz format to what we expect for build...
mv ntop-2.2/* .
# Patches
patch -p0 < ../../SOURCES/version.patch
#patch -p0 < ../../SOURCES/makefile_am.patch
# First, build static libraries - use the new buildAll script
cd gdchart0.94c
./buildAll.sh
#
cd ../ntop
# Now, configure and build ntop
# %automake
# %autoconf
# pcap-include fixed by Milan Kerslager
%configure --enable-optimize  --bindir=%{_bindir} --datadir=%{ntoproot}/share \
     --with-pcap-include=/usr/include \
     --enable-sslv3 \
     --enable-i18n
make faq.html
make ntop.txt
make ntop.html
make

%install
cd ntop
mkdir -p $RPM_BUILD_ROOT/etc/rc.d/init.d \
         $RPM_BUILD_ROOT/%{_bindir} \
         $RPM_BUILD_ROOT/etc/logrotate.d \
         $RPM_BUILD_ROOT/%{_datadir}/%{name}

make install DESTDIR=$RPM_BUILD_ROOT
make install-data-local DESTDIR=$RPM_BUILD_ROOT

# commented out by Milan Kerslager
#mv -f $RPM_BUILD_ROOT/usr/bin/i386-redhat-linux-ntop \
#      $RPM_BUILD_ROOT/usr/bin/ntop
#mv -f $RPM_BUILD_ROOT/usr/share/man/man8/i386-redhat-linux-ntop.8 \
#      $RPM_BUILD_ROOT/usr/share/man/man8/ntop.8

install -c -m0755 %{SOURCE1} $RPM_BUILD_ROOT/etc/rc.d/init.d/ntop
install -c -m0644 %{SOURCE2} $RPM_BUILD_ROOT/etc/logrotate.d/ntop
install -c -m0700 %{SOURCE3} $RPM_BUILD_ROOT/etc/ntop.conf.sample

# create directory for *db files (Milan Kerslager)
mkdir -p $RPM_BUILD_ROOT/var/ntop

%pre
g=`cat /etc/group | grep ^ntop:`
if test ".${g}" = "."; then
    /usr/sbin/groupadd -r ntop 2>/dev/null || :
fi
u=`cat /etc/passwd | grep ^ntop:`
if test ".${u}" = "."; then
    /usr/sbin/useradd -s /bin/false -c "ntop server user" -g ntop \
                      -d %{ntoproot}/share/ntop -M -r ntop 2>/dev/null || :
fi

%post
#echo "***********************************************************************"
#mkdir /usr/share/ntop/rrd
#chown ntop.ntop /usr/share/ntop/rrd
echo "***********************************************************************"
if test -f /etc/init.d/ntop; then
    /sbin/chkconfig --add  ntop
    /sbin/ldconfig
    echo "***********************************************************************"
    if ! test -f /usr/share/ntop/ntop_pw.db; then
        if ! test -f /etc/ntop.conf; then
            echo "*    You must configure /etc/ntop.conf - see /etc/ntop.conf.sample    *"
            echo "*                                                                     *"
            echo "*    (as root run) $ cp /etc/ntop.conf.sample /etc/ntop.conf          *"
            echo "*                  $ vi /etc/ntop.conf                                *"
            echo "*                                                                     *"
            echo "***********************************************************************"
        fi
        echo "* YOU MUST SETUP A PASSWORD BEFORE RUNNING NTOP                       *"
        echo "*                                                                     *"
        echo "*       (as root run) $ /usr/bin/ntop @/etc/ntop.conf -A              *"
        echo "*                                                                     *"
        echo "*       see 1STRUN.txt in /usr/share/doc/ntop-<release>               *"
        echo "***********************************************************************"
    elif ! test -f /etc/ntop.conf; then
        echo "*    You must configure /etc/ntop.conf - see /etc/ntop.conf.sample    *"
        echo "*                                                                     *"
        echo "*    (as root run) $ cp /etc/ntop.conf.sample /etc/ntop.conf          *"
        echo "*                  $ vi /etc/ntop.conf                                *"
        echo "*                                                                     *"
    else
        echo "*                                                                     *"
        echo "*    Starting ntop using a pre-existing setup - check the results!    *"
        echo "*                                                                     *"
        /sbin/service ntop condrestart > /dev/null 2>&1
    fi
fi
echo "***********************************************************************"
echo " "
echo "Questions?  See the FAQ in /usr/share/doc/ntop-<release>"
echo " "

%preun
if [ "$1" = "0" ]; then
	/sbin/service ntop stop > /dev/null 2>&1
	/sbin/chkconfig --del ntop
fi

%postun
if [ "$1" -ge "1" ]; then
	/sbin/service ntop condrestart > /dev/null 2>&1
fi
/sbin/ldconfig

%clean
rm -rf $RPM_BUILD_ROOT

%files
%defattr(-,root,root)
%doc ntop/AUTHORS
%doc ntop/CONTENTS
%doc ntop/MANIFESTO
%doc ntop/COPYING
%doc ntop/ChangeLog
%doc ntop/docs/FAQ
%doc ntop/docs/HACKING
%doc ntop/docs/KNOWN_BUGS
%doc ntop/docs/TODO
%doc ntop/docs/1STRUN.txt
%doc ntop/NEWS
%doc ntop/PORTING
%doc ntop/README
%doc ntop/SUPPORT_NTOP.txt
%doc ntop/THANKS
%config %{_sysconfdir}/rc.d/init.d/ntop
%config %{_sysconfdir}/logrotate.d/ntop
%config %{_sysconfdir}/ntop.conf.sample
%{_bindir}/%{name}
%{_datadir}/%{name}
%{_sysconfdir}/%{name}
%dir %attr(0770,ntop,ntop) %{_var}/%{name}

%{_mandir}/man8/ntop.8.gz

%{_libdir}/ntop
%{_libdir}/plugins
#%{_libdir}/libntop*
#%{_libdir}/libicmpPlugin*
%{_libdir}/lib*

%changelog
* Thu Jul 24 2003 Milan Kerslager <kerslage@linux.cz> 2.2-1.8
- rebuild for RH 8.0
- fixed path for pcap include files
- commented out renaming (binary and manual page)
- /var/ntop for *.db files

* Mon Apr 14 2003 Burton M. Strauss III <burton@ntopsupport.com>
- v2.2    - Released!

* Thu Apr 10 2003 Burton M. Strauss III <burton@ntopsupport.com>
- v2.1.92 - Of major note is the rewrite of the ./configure system
            should be more accurate, more informative and not
            require the auto* tools for non-developers.

* Wed Apr 02 2003 Burton M. Strauss III <burton@ntopsupport.com>
- v2.1.91

* Mon Mar 17 2003 Burton M. Strauss III <burton@ntopsupport.com>
- v2.1.90

* Fri Mar 14 2003 Burton M. Strauss III <burton@ntopsupport.com>
- v2.1.58 -1 add the data and .pem files to the install

* Sat Feb 08 2003 Burton M. Strauss III <burton@ntopsupport.com>
- v2.1.57 - Minor fixup in ntop.init where I had the old name for ntop.conf
          - Enabled i18n
- v2.1.56 

* Tue Jan 28 2003 Burton M. Strauss III <burton@ntopsupport.com>
- v2.1.55 

* Sat Dec 14 2002 Burton M. Strauss III <burton@ntopsupport.com>
- -1 - Fix init and logrotate scripts, also create rrd directory and chown it
- v2.1.53 - Fix deadlock occuring in 2.1.52
          - other minor stuff

* Wed Dec 05 2002 Burton M. Strauss III <burton@ntopsupport.com>
- v2.1.52 - ./configure scripts
          - rrd
          - Force gdchart to i386
          - 1strun stuff
          - @/etc/ntop.conf

* Sun Nov 24 2002 Burton M. Strauss III <burton@ntopsupport.com>
- v2.1.51-1 (new tigger/ur-tigger)

* Fri Nov 1 2002 Burton M. Strauss III <burton@ntopsupport.com>
- v2.1.51

* Tue Sep 20 2002 Burton M. Strauss III <burton@ntopsupport.com>
- v2.1.3

* Tue Jul 30 2002 Burton M. Strauss III <burton@ntopsupport.com>
- v2.1.2a (not released) - added chkconfig to requires list
-                        - rearranged patches
-                        - Added creation of ntop user

* Thu Jul 25 2002 Burton M. Strauss III <burton@ntopsupport.com>
- v2.1.2

* Thu Jul 11 2002 Burton M. Strauss III <burton@ntopsupport.com>
- v2.1

* Thu Jul 03 2002 Burton M. Strauss III <burton@ntopsupport.com>
- Updated to RC3

* Thu Jun 20 2002 Burton M. Strauss III <burton@ntopsupport.com>
- Updated to RC2A - unofficial post RC2 build.

* Tue Jun 04 2002 Burton M. Strauss III <burton@ntopsupport.com>
- Updated to RC2

* Fri May 17 2002 Burton M. Strauss III <burton@ntopsupport.com>
- Updated to RC1

* Mon May 13 2002 Burton M. Strauss III <burton@ntopsupport.com>
- Updated for 2.0.99 - beta - from 13May2002 snapshot

* Fri Nov 23 2001 Hal Burgiss <hal@foobox.net>
- Updated for 2.0 beta.

* Thu Oct 11 2001 Hal Burgiss <hal@foobox.net>
- Updated for 2.0 pre-release snapshots. Many changes.