Majordomo and MajorCool HOWTO John Archie, johnarchie@emeraldis.com v1.0, 10 November 1999 This document is intended to guide a user through an installation of the Majordomo Mailing List Software and MajorCool. MajorCool is a utility for managing Majordomo lists via a CGI script; many people who are unfamiliar with Majordomo's text-based nature prefer the more user friendly web-based interface of MajorCool. ______________________________________________________________________ Table of Contents 1. Introduction 1.1 Credits 1.2 References 2. Sendmail 2.1 Aliases 2.2 Editing 2.2.1 Another Aliases File 2.2.2 Undesirable Sendmail Security Features 2.2.3 Sendmail Trusted Users 2.2.4 Sendmail Restricted Shell 2.2.5 Group Write Permission 2.3 Configuring 2.3.1 Creating Another Aliases File 2.3.2 Making Majordomo a Trusted User 2.3.3 Disabling Sendmail Secure Shell 2.3.4 Disabling Security Features 2.4 Sendmail Security Concerns 2.4.1 Consequences of Unsafe Group Writes 2.4.2 Consequences of Making Majordomo a Trusted User 2.4.3 Consequences of Unsafe Group Writable Directory Paths 2.4.4 Protecting Subscribers' Privacy 3. Majordomo 3.1 Preparing to Install 3.2 Editing the Installation Files 3.3 Installing Majordomo 3.4 Creating the Majordomo Aliases 3.5 Testing the Configuration 3.6 Creating Lists 3.7 Further Testing of the Configuration 3.8 Creating Better Aliases 4. MajorCool 4.1 Extracting MajorCool 4.2 Edit the 4.3 Installing MajorCool 5. List of Terms ______________________________________________________________________ 1. Introduction This HOWTO is divided into several sections. The Sendmail portion of this HOWTO is a general discussion about Majordomo and how it interfaces with Sendmail, as well as the various ways Majordomo can be set up and the consequences of such decisions. In contrast, the rest of the HOWTO is set up like a tutorial guiding a user through a plain installation process of Majordomo. I recommend going over the generic installation process described in the sections after Sendmail, referencing the appropriate portions of the Sendmail section when necessary (the appropriate sections are mentioned in the appropriate places). Then, read the Sendmail section carefully and decide exactly how to configure your system. Finally, a List of Terms provides definitions for some of the more abstruse terms. Also, when downloading any of the software mentioned in this document, if any of the official sites are down, the tarballs can be downloaded from my site--http://philosophy.lander.edu/~jarchie/majordomo/. 1.1. Credits Thanks go out (in alphabetical order) to a few people for their invaluable help. o Lee Archie for proofreading o James Bruce and Bill Poston for the opportunity to set up my first permanent machine running Majordomo o Joseph D. Sloan for reading the Sendmail portion and making helpful suggestions 1.2. References Although I have tried to make this HOWTO as complete as possible, it is always a good idea to look at more than one source. Below is a list of the resources that I found helpful when trying to configure Majordomo for the first time. Books: 1. Bryan Costales with Eric Allman, sendmail. Cambridge: O'Reilly, 1997. 2. Alan Schwartz, Managing Mailing Lists. Cambridge: O'Reilly, 1998. Free resources: 1. the documentation that comes with Sendmail especially README.cf 2. the documentation that comes with Majordomo especially INSTALL and NEWLIST 3. the Majordomo-Users Mailing List Archive (http://www.hpc.uh.edu/majordomo-users/) 4. the documentation that comes with MajorCool 2. Sendmail Since Majordomo is responsible for managing E-mail lists, Majordomo relies heavily on a MTA such as Sendmail. There are other MTA's such as Smail and Qmail out there; however, Sendmail is the oldest and most common. This section introduces the reader to the areas of Sendmail that are useful or necessary to configure when using Majordomo. 2.1. Aliases The Sendmail aliases file (usually /etc/aliases) is used for making aliases for E-mail addresses. For example, once Majordomo is installed, usually an entry in the aliases file reads: majordomo-owner: jarchie This entry means that all mail addressed to majordomo-owner@host.com will actually be sent to jarchie@host.com. Notice it is unnecessary to append the @host.com to jarchie because both users are on the same host. If it were desired to redirect the message to a different user on a different host, one would have to add the @host.com portion. Another type of entry in the aliases file allows an E-mail to be redirected to multiple addresses people listed in a file: testlist: :include:/usr/local/majordomo-1.94.4/lists/testlist This entry states that any message sent to testlist@host.com will be redirected to all the addresses listed in the file /usr/local/major- domo-1.94.4/lists/testlist. The testlist file might look something like this: johnarchie@emeraldis.com srobirds@yahoo.com acreswell@geocities.com Majordomo is able to add or subtract addresses from a list by taking advantage of this feature. When a subscribe request is processed, the user's E-mail address is appended to the testlist file; when an unsub- scribe request is processed, the user's E-mail address is removed from the testlist file. One can also add or subtract addresses manually simply by editing the file with a text editor such as vi. Since Majordomo needs to be able to process commands sent to it via E- mail, Sendmail must be able to execute the Majordomo program and pass the message to it. This is done by adding another type of entry to the aliases file: majordomo: "|/usr/local/majordomo-1.94.4/wrapper majordomo" The program /usr/local/majordomo-1.94.4/wrapper is a wrapper (SUID majordomo and SGID majordomo or daemon depending on the configuration) that runs the Majordomo program. The quotation marks around the sec- ond part of the alias entry are used to tell Sendmail that this part of the entry is all one statement; the quotation marks would be unnec- essary if there wasn't a space between wrapper and majordomo. The | is known as a "pipe"; it is used to tell Sendmail to send the E-mail to the wrapper via the standard input. (Since all the wrapper does here is to call majordomo, the E-mail is actually being sent to Major- domo.) The wrapper accepts one parameter--the parameter of the pro- gram it is supposed to execute. (Any parameters after the first will be passed to the program the wrapper is executing.) For security reasons, the wrapper only executes programs located in the Majordomo directory, /usr/local/majordomo-1.94.4/. This restriction prevents a programmer from using the wrapper to run programs that should not have Majordomo privileges. (For example, wrapper /bin/vi would allow any user to edit any Majordomo configuration file.) When a message is sent to majordomo@host.com, Sendmail starts up the wrapper which, in turn, starts up majordomo, and Sendmail sends the message to the majordomo script via the standard input. Majordomo then extracts the commands out of the message and responds appropriately. 2.2. Editing sendmail.cf Due to its arcane syntax, sendmail.cf is perhaps the most feared of all configuration files. In the installation of majordomo, it is not absolutely necessary to edit sendmail.cf; however, a couple of features are extremely useful. Unless major changes have to be made to sendmail.cf (which, thankfully, Majordomo does not require), editing the file is not that difficult. All that need be done is adding extra lines to the file. 2.2.1. Another Aliases File Creating a separate file for the Majordomo aliases, such as /usr/local/majordomo-1.94.4/majordomo.aliases, is often a good idea. This can be done rather easily by adding a line to the end of the sendmail.cf file OA/usr/local/majordomo-1.94.4/majordomo.aliases To have a /usr/local/majordomo-1.94.4/majordomo.aliases, Sendmail must be able to generate a database (/usr/local/majordomo-1.94.4/major- domo.aliases.db). The easiest way to accomplish this is to go ahead and create an empty database for Sendmail to overwrite. ______________________________________________________________________ [root@kes majordomo-1.94.4]# touch majordomo.aliases.db [root@kes majordomo-1.94.4]# chmod 644 majordomo.aliases.db ______________________________________________________________________ Another method to get around this issue is simply to create the major- domo.aliases file in the /etc/ directory, rather than the Majordomo home directory. 2.2.2. Undesirable Sendmail Security Features For certain setups, some security measures that Sendmail uses can prevent Majordomo from working properly. Obviously, these security features must be turned off. 2.2.3. Sendmail Trusted Users Sendmail is programmed to make it difficult for people to make "perfect" forgeries of E-mail. For example, when a user sends a message via SMTP, the source IP address is typically logged, and when a user sends a message by giving it directly to Sendmail and specifying the sender using sendmail -f, Sendmail puts a warning message in the header specifying the user who really sent the message. However, some programs need to be able to send messages masquerading as other users, and having this extra security line appended to the header is annoying. Sendmail handles this problem by having trusted users. Majordomo must run as a Sendmail trusted user since the program needs to send mail as other users. This feature can be set up in two ways. The easiest way is to just add Majordomo to the daemon group. To add the majordomo user to the daemon group, edit the line in the /etc/group file from something that appears similar to daemon::2:root,bin,daemon to daemon::2:root,bin,daemon,majordomo Another way is to make Majordomo a trusted user by adding the line Tmajordomo to the sendmail.cf file. 2.2.4. Sendmail Restricted Shell If Sendmail is using smrsh, then the only programs that can be executed are those under the /etc/smrsh/ directory. Perhaps the best solution to run the wrapper from the aliases file is to create a symbolic link from /etc/smrsh/wrapper to /usr/local/majordomo-1.94.4/wrapper. ______________________________________________________________________ [root@kes smrsh]# ln -s /usr/local/majordomo-1.94.4/wrapper wrapper ______________________________________________________________________ A second solution is actually moving the wrapper into the /etc/smrsh/ directory. ______________________________________________________________________ [root@kes smrsh]# mv /usr/local/majordomo/wrapper ./ ______________________________________________________________________ If security is not a major concern, the secure shell can be disabled. One fairly crude method is simply to delete /usr/sbin/smrsh, and copy or link /bin/sh in its place. ______________________________________________________________________ [root@kes sbin]# rm -f smrsh [root@kes sbin]# ln -s /bin/sh smrsh ______________________________________________________________________ A better (but more difficult) method is to edit sendmail.cf. Change the reference from /usr/sbin/smrsh Mprog, P=/usr/sbin/smrsh, F=lsDFMoqeu9, S=10/30, R=20/40, D=$z:/, T=X-Unix, A=sh -c $u to /bin/sh Mprog, P=/bin/sh, F=lsDFMoqeu9, S=10/30, R=20/40, D=$z:/, T=X-Unix, A=sh -c $u 2.2.5. Group Write Permission If you plan on having a non-root user add and manage mailing lists, you will need to make the majordomo.aliases file that is group writable. However, Sendmail will not allow this configuration for security reasons (see the section on ``Sendmail Security Issues''). To disable this security feature, add the line O DontBlameSendmail=GroupWritableAliasFile to the sendmail.cf file. Also, the lists directory must be group writable in order to add a list, but Sendmail will not allow this setup for similar reasons. To disable this security feature, adding the line O DontBlameSendmail=IncludeFileInGroupWritableDirPath to the sendmail.cf configuration file is necessary. 2.3. Configuring sendmail.cf Using the M4 Configuration For administrators who do not want to edit the sendmail.cf file directly, it is possible to use M4 to create the file; this section describes how to make the changes discussed in the previous section to the mc file instead of the cf file. The purpose of the M4 configuration is to provide an easy way to create the sendmail.cf file. The idea is that the created mc file is easier to understand than the sendmail.cf file. By running the m4 preprocessor, a sendmail.cf file is generated: ______________________________________________________________________ [root@kes etc]# m4 /etc/sendmail.mc > /etc/sendmail.cf ______________________________________________________________________ 2.3.1. Creating Another Aliases File Add the line define(`ALIAS_FILE',`/etc/aliases,/usr/local/majordomo/majordomo.aliases') to the sendmail.mc file. 2.3.2. Making Majordomo a Trusted User Add the line define(`confTRUSTED_USERS',`majordomo') to the sendmail.mc file. 2.3.3. Disabling Sendmail Secure Shell Delete the line that reads FEATURE(smrsh) in the sendmail.mc file. 2.3.4. Disabling Security Features To disable the group write permission security check on the aliases file, add the line define(`confDONT_BLAME_SENDMAIL',`GroupWritableAliasFile') to the sendmail.mc file. To disable the path write permission security check for the include files, add the line define(`confDONT_BLAME_SENDMAIL',`IncludeFileInGroupWritableDirPath') To enable both of these options, use define(`confDONT_BLAME_SENDMAIL',`GroupWritableAliasFile,IncludeFileInGroupWritableDirPath') Adding the last statement is equivalent to writing O DontBlameSendmail=GroupWritableAliasFile,IncludeFileInGroupWritableDirPath in sendmail.cf, and this entry is the same as writing the entries on separate lines: O DontBlameSendmail=GroupWritableAliasFile O DontBlameSendmail=IncludeFileInGroupWritableDirPath 2.4. Sendmail Security Concerns Security is inversely proportional to convenience; the only secure machine is one that cannot be accessed by anyone. By disabling some of Sendmail's security features, a machine will inevitably become less secure. However, it is important to understand the basic security risks in order to determine if the convenience is worth possible breaches of security. 2.4.1. Consequences of Unsafe Group Writes If a user has write permission to access an aliases file, she should be a trusted user. By putting an entry into the aliases file (such as the one used to execute wrapper) a user can execute any program with the privileges of Sendmail (daemon or, in older versions, root). The gaffe of this would allow people to remove or change the permissions of files that belong to daemon (using the rm or chmod commands in the aliases file). To some extent, this possibility is avoided by using smrsh; however, one must still be careful as to what files are in the /etc/smrsh/ directory. Another issue that arises is that the user who can access the aliases file can append or write to files that belong to daemon by using file redirection (a >> or > instead of a |). Even so, this breach too can be countered by adding a line to the sendmail.cf file that limits what files can be written to through the aliases file. Add the line O SaveFileEnvironment=/path/to/safe/files to the sendmail.cf file or add define(`confSAFE_FILE_ENV',`/path/to/safe/files') to the sendmail.mc file. However, this maneuver only leaves a thin layer of security between the user and daemon. A much better idea would be to have the aliases file only writable by root and to create an SUID root program to automatically add and remove the Majordomo related aliases. In the case of include or .forward files, commands or redirections are run as the user who owns the file. Therefore, if a file is group writable, a member of the group can execute commands as the user who owns the file. In other words, any user in the majordomo group could execute commands as Majordomo. However, since the majordomo user is created without a shell, commands or redirections will not be processed in include files owned by majordomo. 2.4.2. Consequences of Making Majordomo a Trusted User If majordomo is a trusted user, then users added to the majordomo group will have the privileges of a trusted user. If majordomo is a member of the daemon group, users in the majordomo group will not be trusted. It may be a good idea to make majordomo a member of the daemon group, and create a separate group called majordomo for people managing the Majordomo lists in order to avoid making majordomo a trusted user. Also, by making majordomo a member of the daemon group, the wrapper need not be executable by world. (The wrapper can be executable by the group daemon, and Sendmail can execute it through the aliases file since it executes binaries as daemon.) This added security prevents users on the system from "feeding" Majordomo false letters through the wrapper. 2.4.3. Consequences of Unsafe Group Writable Directory Paths If a user has group write permission to a directory, for example /etc/, the user could simply move any file and create a new one in its place. An attack might go something like this ______________________________________________________________________ [mallory@kes etc]$ mv aliases ... [mallory@kes etc]$ vi aliases ______________________________________________________________________ The user can then make her own aliases! This attack, however, could be prevented by Sendmail's security checking for unsafe group writable paths. Such an attack also would work with include and .forward files having unsafe paths. In the case of Majordomo, the user in the majordomo group already has access to the include files, so this does not really compromise security. However, an administrator should be careful to prevent these undesirable unsafe group writable directory paths from occurring in the future because Sendmail will not check for them. 2.4.4. Protecting Subscribers' Privacy Unfortunately, sophisticated spammers can expand mail lists using the EXPN SMTP command. For this reason, administrators should disable this feature when serving mailing lists. Add the line O PrivacyOptions=noexpn to the sendmail.cf file or define(`confPRIVACY_FLAGS',`noexpn') to the sendmail.mc file. 3. Majordomo Majordomo is, of course, the piece of code that this document revolves around; it consists of a collection of Perl scripts with the sole purpose of managing mailing lists. 3.1. Preparing to Install Download the gzipped source distribution of the latest version of Majordomo from http://www.greatcircle.com/majordomo/ and uncompress it ______________________________________________________________________ [jarchie@kes jarchie]$ zcat majordomo-1.94.4.tar.Z | tar xvf - ______________________________________________________________________ This will create a subdirectory with all of the files necessary to install Majordomo; this directory cannot be the same directory in which Majordomo is to be installed. Majordomo must run under a specific UID and GID so when any of the scripts are run, they will run under Majordomo's UID. Thus, it is necessary to decide what UID and GID Majordomo should run under. Also, Majordomo must be a Sendmail trusted user. (See ``Consequences of Making Majordomo a Trusted User'') Check the /etc/passwd and /etc/group files to find a UID and GID that are not taken. For this example, a UID of 16 and a GID of 16 was chosen. You have to decide on the location where the Majordomo scripts will reside; in this HOWTO, the directory /usr/local/majordomo-1.94.4/ was chosen. If you are using a shadowed password file add entries similar to majordomo:x:16:16:Majordomo List Manager:/usr/local/majordomo-1.9.4: to your /etc/passwd and add an appropriate entry to /etc/shadow. majordomo:*:10883:0:88888:7::: Use the other entries in these files as a guide for exactly what should be added. These are only the values for my system. If you are not using shadowed passwords, only an entry in the /etc/passwd file is necessary. To create a Majordomo group, add the line majordomo:x:16:jarchie,majordomo to your /etc/group file. This will give you access to the Majordomo files that are group writable. Also, you might want to add majordomo to the daemon group to make it a trusted user (See ``Sendmail Trusted Users''); to do this, change the line that looks something like daemon:x:2:root,bin,daemon to daemon:x:2:root,bin,daemon,majordomo 3.2. Editing the Installation Files The Makefile contains all the information needed to install Majordomo; it is usually necessary to edit lines in the Makefile that refer to system specific settings so Majordomo will be able to install cleanly on your system. Most of the default settings are correct; however, the following settings, almost invariably, need to be changed on a per system basis. ______________________________________________________________________ [jarchie@kes majordomo-1.94.4]$ vi Makefile ______________________________________________________________________ The settings PERL = /bin/perl CC = cc W_HOME = /usr/test/majordomo-$(VERSION) MAN = $(W_HOME)/man W_USER = 123 W_GROUP = 45 should be changed to something more appropriate for your system. For example, in my setup, the values were changed to PERL = /usr/bin/perl CC = gcc W_HOME = /usr/local/majordomo-1.94.4 MAN = /usr/man W_USER = 16 W_GROUP = 16 Also the majordomo.cf file must be created. An easy way to create this file is to copy the provided sample.cf file to majordomo.cf and edit it. ______________________________________________________________________ [jarchie@kes majordomo-1.94.4]$ cp sample.cf majordomo.cf [jarchie@kes majordomo-1.94.4]$ vi majordomo.cf ______________________________________________________________________ Again, most of the settings are correct by default, but the following lines might need to be changed for your system from $whereami = "example.com"; $whoami = "Majordomo\@$whereami"; $whoami_owner = "Majordomo-Owner\@$whereami"; $homedir = "/usr/test/majordomo"; $digest_work_dir = "/usr/local/mail/digest"; $sendmail_command = "/usr/lib/sendmail"; to something more appropriate such as $whereami = "kes.emeraldis.com"; $whoami = "majordomo\@$whereami"; $whoami_owner = "majordomo-owner\@$whereami"; $homedir = "/usr/local/majordomo-1.94.4"; $digest_work_dir = "/usr/local/majordomo-1.94.4/digest"; $sendmail_command = "/usr/sbin/sendmail"; $whoami and $whoami_owner do not need to be changed for Majordomo to work; however, I changed them because I like to avoid typing capital letters. $digest_work_dir is a temporary directory where digest files should be placed; this directory should be assigned to wherever you want digests to be stored. If you do not plan to use digested lists, do not worry about this option. $whereami, $homedir, and $send- mail_command should be changed to appropriate values for your system. Unlike the Makefile, these options can always be changed after Major- domo is installed by editing majordomo.cf in the directory where Majordomo was installed. (The configuration file is simply copied during setup.) 3.3. Installing Majordomo The next step is to compile the Majordomo wrapper. The wrapper is the only Majordomo component that needs to be compiled because everything else is a collection of perl scripts and, therefore, is not compiled. [jarchie@kes majordomo-1.94.4]$ make wrapper To install the Majordomo files, execute the commands [jarchie@kes majordomo-1.94.4]# make install [jarchie@kes majordomo-1.94.4]# make install-wrapper The first command can be done as the Majordomo user, but the second command needs to be done as root so the installation script can SUID root the Majordomo wrapper. (Since, majordomo was created without a login shell or password, if you want to execute the first command as majordomo, you will need to su majordomo as root in order to become majordomo.) 3.4. Creating the Majordomo Aliases Sendmail aliases must be created for Majordomo so commands sent to Majordomo can be processed by Majordomo and the majordomo owner in order that people can E-mail you through the standard owner-majordomo address. Add the following entries to your aliases file. (See ``Aliases'') majordomo: "|/usr/local/majordomo-1.94.4/wrapper majordomo" owner-majordomo: jarchie majordomo-owner: jarchie 3.5. Testing the Configuration As a regular user (not as majordomo or as root), run ______________________________________________________________________ [jarchie@kes jarchie]$ /usr/local/majordomo-1.94.4/wrapper config-test ______________________________________________________________________ This program can detect most problems in the Majordomo installation. 3.6. Creating Lists To create a list, create a file with the name of the list in the Majordomo lists directory. For example, to create a list called test, create a test file as Majordomo ______________________________________________________________________ [root@kes /]# su majordomo [majordomo@kes /]$ touch /usr/local/majordomo-1.94.4/lists/test ______________________________________________________________________ and add the related aliases test: :include:/usr/local/majordomo-1.94.4/lists/test owner-test: jarchie test-request: "|/usr/local/majordomo-1.94.4/wrapper request-answer test" test-approval: jarchie 3.7. Further Testing of the Configuration Now test the operation of the list by issuing a lists command to majordomo. ______________________________________________________________________ [jarchie@kes jarchie]$ echo lists | mail majordomo ______________________________________________________________________ It should only take a second for majordomo to reply with a message containing all the lists which are currently set up. Next, try issu- ing a help command. ______________________________________________________________________ [jarchie@kes jarchie]$ echo help | mail majordomo ______________________________________________________________________ Majordomo should reply with a list of all commands that Majordomo accepts. It might be a good idea to save the message for future ref- erence. To see if the aliases are working properly, try subscribing and unsubscribing yourself to the list. ______________________________________________________________________ [jarchie@kes jarchie]$ echo subscribe test | mail majordomo ______________________________________________________________________ You will receive an E-mail message containing instructions on how to confirm your subscription as well as a letter confirming that your command was successful. After sending back your confirmation, Major- domo should send back two letters--one letter stating that your sub- scribe request was successful and another letter welcoming you to the test list. The owner of the list will also be sent a message stating that you have subscribed to the list. To unsubscribe from a list, send a unsubscribe command ______________________________________________________________________ [jarchie@kes jarchie]$ echo unsubscribe test | mail majordomo ______________________________________________________________________ You should be sent back a letter stating that your command was suc- cessful. 3.8. Creating Better Aliases For some lists, it may be desirable to have Majordomo process messages before they reach the list. For example, Majordomo has an option automatically to filter messages based on content (such as taboo words), or Majordomo can catch people trying to send Majordomo commands to the list. To use these options, it is necessary to use a better set of aliases such as test: "|/usr/local/majordomo-1.94.4/wrapper resend -l test test-list" test-list: :include:/usr/local/majordomo-1.94.4/lists/test owner-test: jarchie test-owner: jarchie test-request: "|/usr/local/majordomo-1.94.4/wrapper majordomo -l test" The last entry allows someone simply to send a message to test- request@kes.emeraldis.com with the text subscribe rather than sending a letter to majordomo@kes.emeraldis.com with the text subscribe test. 4. MajorCool MajorCool is a web-based interface to Majordomo allowing users to add and delete themselves from lists and manage lists that they own. The installation is fairly straightforward; all that need be done is to unzip the files, edit one line in the Configure script, and execute the script. 4.1. Extracting MajorCool The latest files can be downloaded from http://ncrinfo.ncr.com/pub/contrib/unix/MajorCool/majorcool.tar.gz. ______________________________________________________________________ [jarchie@kes jarchie]$ mkdir majorcool [jarchie@kes jarchie]$ mv majorcool.tar.gz ./majorcool/ [jarchie@kes majorcool]$ zcat majorcool.tar.gz | tar xvf - ______________________________________________________________________ 4.2. Edit the Configure Script Open Configure and ______________________________________________________________________ [jarchie@kes majorcool]$ vi Configure ______________________________________________________________________ change the line that reads PERLBIN="/usr/local/bin/perl" # How to start a perl script to the proper location of perl PERLBIN="/usr/bin/perl" # How to start a perl script otherwise, MajorCool will not be installed properly. 4.3. Installing MajorCool When running the Configure script, if the default choice for an option is okay, simply pressing Enter will accept the default. ______________________________________________________________________ [root@kes majorcool]# ./Configure ______________________________________________________________________ The Configure script will ask you to hit Enter a few times, and then it will ask for the location of Majordomo and some more questions about the setup of your web server. ______________________________________________________________________ What is the installation directory of Majordomo? []: /usr/local/majordomo-1.94.4 Will place the MajorCool programs in /usr/local/majordomo-1.94.4. What is the path to your Majordomo configuration file? [/usr/local/majordomo-1.94.4/majordomo.cf]: Using configuration file name '/usr/local/majordomo-1.94.4/majordomo.cf' Where would you like temp files created when MajorCool runs? [/tmp]: MajorCool needs to install CGI programs, support files, and icons in your Web server directories. What is the root directory for your Web server? []: /home/httpd Where is the cgi-bin directory for your Web server? [/home/httpd/cgi-bin]: Will place the programs in /home/httpd/cgi-bin. What is your server's URL for '/home/httpd/cgi-bin'? [/cgi-bin]: Where is the image directory for your Web server? [/home/httpd/icons]: Will place the icons in /home/httpd/icons. What is your server's URL for '/home/httpd/icons'? [/images]: /icons Where is the root directory for documents on your Web server? []: /home/httpd/html ______________________________________________________________________ The Configure script will ask other questions that are less critical. (The defaults are fine, but you might want to change a few settings to fit your preferences. Unlike some of the web-server questions, the meanings should be obvious from the context.) When the configuration file that the script generated from your answers is displayed, you should accept the new version. ______________________________________________________________________ Accept the new version? [yes|no|list|edit|diff]? y ______________________________________________________________________ The installation script will install the MajorCool files and run the majordomo cgi script which outputs the html file to the console. Check to see if the installation worked by viewing the majordomo cgi script from the web. ______________________________________________________________________ [jarchie@kes jarchie]$ lynx http://localhost/cgi-bin/majordomo ______________________________________________________________________ 5. List of Terms digest a collection of new messages mailed to the members of an archived list as one message. A list is called digested when it is archived and, periodically, a digest is sent out. GID (Group ID) an identification number assigned to files, directories, and processes to restrict access--similar to UID except multiple people can be a member of a group. On Unix type systems, groups can be set up (defined in the /etc/group file). When a user name is a member of a group, she can access files created with that GID (assuming permissions allow it). MTA (Mail Transfer Agent) a program, such as Sendmail, responsible for passing mail from one location to another. SGID (Set Group ID) a file attribute which allows a program to run with specific group privileges no matter who executes it. smrsh (SendMail Restricted SHell) the shell that Sendmail uses to execute programs. smrsh puts restrictions on the programs that can be run to make it safer than using a regular shell such as the Bourne Shell. SUID (Set User ID) a file attribute which allows a program to run as a specific user no matter who executes it. UID (User ID) an identification number assigned to files directories, and processes--similar to GID except every user has a unique UID. Every process must run under a UID (the one-to- one relationship between the UID and user name is defined in /etc/passwd). The process' UID determines what the program can access. In general a regular user can change the permissions on files that she owns unless the UID is 0 (the root user). In that case, root can modify any files on the system. wrapper a program used to start another program; usually a wrapper is SUID or SGID so it can bestow privileges onto another program that the other program would not normally have.